Product Description

Tungsten wire

Quick Details

Place of Origin: Henan, China (Mainland)

Brand Name: Kekai

Model Number: W1

Wire Gauge: 0.002mm

material: tungsten

chemical composition: tungsten

purity: >99.95%

Applications: special applications

Appearance: coiled

Dia.: 0.001-2.00mm

density: 19.2g/cm3

Melting Point: 3410 Ceiclus

Boiling Point: 5927 Ceiclus

Surface: Black and Cleaned

.Packaging & Delivery

Packaging Details: plastic inside and wooden case outside

Delivery Detail: 7-15days

 

1. Tungsten wire tungsten Filament: tungsten wire in spool

Model NO.: KK

Type: Tungsten Wire

Material: W-1

Purity: 99.95%Min.

Melting Point: 3410 Ceiclus

Boiling Point: 5927 Ceiclus

Density: 19.2g/cm3

Diameter: 0.001-2.00mm

Surface: Black and Cleaned

Export Markets: Global

2. Dimensions and Tolerances of tungsten wire:

Tungsten wires diameters are generally expressed in terms of inches or mils (thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in diameter, the diameter of the wire is measured by weight per unit length. That is, the weight expressed in mg of a 200 mm length of wire.

The standard diameter tolerance is: ± 3% of the weight measurement. Closer tolerances are available, depending upon the application for the wire product.

Specification:

Diameter, mm	Difference between 2 feet, mm		Inside diameter tolerance, mm
	Big heater element	Small heater element
0.4-3.0	±1		±0.3
0.4-1.0	±1		±0.3
0.4-1.3	±1		±0.3
0.4-1.0	±2	±1	±0.3
0.4-1.0	±1		±0.3
0.4-1.0	several stranded coils		±0.3

Note: Different diameter and length are available for your 99.95% pure stranded tungsten wire.

3. Straightness of tungsten wire:

Wire may be finished in the unstraightened or as drawn condition and is controlled to Bango's internal standards, In addition, wire can be straightened via mechanical or heat treating processes. Typically, the measure of the straightness of a tungsten wire is obtained by cutting a ten inch long piece of wire and allowing it to lie on a flat clean surface. The maximum deviation from a straight line along its length is the quantitative measure of its straightness. In general, as the degree of straightness increases, tensile strength decreases.

4. Quality and Finish:

Wire is free of scratches, kinks and distortions insofar as they are harmful to the intended end use of the product. Surface finish is supplied in the black, as drawn condition, where drawing lubricants and oxides are retained on the surface, or in the cleaned condition by firing in hydrogen or electrochemical etching.

5. Products Feature:

1. Excellent Conductivity
2. Resistance of high temperature.
3. Abrasion and Erosion.
4. Suitable for making heating wires.
5. Twisted wires for coating films under vacuum and for tungsten wires in electrical light sources usage.

6. Application:

Tungsten is widely used as refractory metals. In wire form, tungsten wire is essential for the production of lighting products and other goods where its high temperature properties are of use. Among its properties are a melting point of 3410° C, a low coefficient of thermal expansion and low vapor pressure at elevated temperatures along with good electrical and thermal conductivity.

The important applications of tungsten wire are for the production of coiled incandescent lamp filaments, cathode and support structures for power tubes, heating elements for high temperature furnaces and evaporation sources in metallizing processes. Thicker sizes of tungsten wire, straightened, finish-ground and cut into rod pieces are widely used for glass-to-metal seal lead parts in the lighting and electronic industries.

7. Technical process:

Tungsten Powder → Isostatic Pressing → Bar Billet →Sintering → Semi-finished bar →Forging→ Swaging → Drawbench → End products → Inspection → Packing

8. Package:

1. Sealed plastic bags to prevent oxidation during transportation and storage.

2. Carton box or plywood case outside.

Customers' special request is available for 99.95% pure stranded tungsten wire.

Payment Terms︰ TT

Product Image